Morehouse/Admet  Calibration Systems

 
   
Load Cell Meters
Dual Channel 4215 Load Cell Meters
Morehouse 4215 Direct Reading Calibration Solution
Morehouse DSC USB Direct Reading Calibration Solution
Morehouse/Admet Close to  Direct Reading System
Morehouse/PSD Close to  Direct Reading System

 

We Offer the following

Calibration Grade Load Cells with ASTM E74 lower limits from 2% -8% of capacity click here.

Morehouse Custom Carrying Cases for your load cell system click here

Morehouse Calibration Systems

Morehouse Calibration Software Available for download

Morehouse Model 4215 manual

Morehouse Force Calibration Service

Morehouse Highly Accurate Torque Calibration Service

Have us set up and calibrate your load cells with Morehouse Load Cell Meters. 

Product Bulletins

Product Bulletin Download

Contact Us

E-Mail: @mhforce.com   

Telephone:

 (717)  843-0081

Fax: (717)  846-4193  

 

NOTE: These systems are an alternative for those who do not require the very high accuracy of the Morehouse 4215 meter .

Morehouse Close to Direct Reading Load Cell System  

  Morehouse admet gauge buster unit

* This system is close to direct reading as Morehouse will setup and calibrate load cell systems with an Admet Gauge Buster Unit.  

THIS SYSTEM CAN  BE CONFIGURED WITH MOREHOUSE LOAD CELLS.  THESE LOAD CELLS ARE AVAILABLE IN CAPACITIES THRU 110,000 LBF AND MOREHOUSE COLUMN TYPE LOAD CELLS AVAILABLE IN CAPACITIES UP TO 1,000,000 LBF.  THE SYSTEM CAN ALSO BE S-BEAM TYPE LOAD CELLS THAT ARE AVAILABLE IN CAPACITIES FROM 20 LBF - 11,000 LBF.

Morehouse Gauge Buster 2 Manual GB2.pdf

ALSO AVAILABLE PORTABLE BATTERY PACK OPTION TO DRIVE ADMET FOR HOURS WITHOUT A WALL OUTLET.  14V SETTING SHOULD BE SELECTED TO OPERATE ADMET.   THIS PACK MAY ALSO BE USED ON PORTABLE COMPUTERS ETC..,  TO EXTEND BATTER LIFE.

 

portable battery packThis powerful little battery pack is very flexible, it can act as a 5 volt battery or a 19 volt battery with 6 steps in between. Outputs at 5V, 6V, 7.5V, 9V, 12V, 14V, 16V and 19V. It can also be charged with voltages as low as 5 volts and as high as 24VDC.

Back to Home Page