Torque Calibration Services |
| Torque Calibration Service (Accredited to Iso Guide 17025) |
Force Calibration Services |
| Force Calibration Service (Accredited to Iso Guide 17025) A2LA, ISO 376 |
| Force Calibration Compliance |
| What you need to know about Accredited Force Calibration Labs |
Morehouse Torque Calibration Service features a primary torque standard with unequaled accuracy (accurate to .002% of applied torque)
Through a partnership with the National Physical Laboratory in England, this machine was commisioned and is now operational.
Detailed information about the NPL/Morehouse torque machine can be downloaded here
Morehouse Fundamentals of torque calibration.pdf
This primary standard meets the criteria set forth in ASTM standar E2428.
Click Here For Current Pictures of the new Morehouse Torque Laboratory
E-Mail:
hzumbrun@mhforce.com
Telephone:
(717) 843-0081
Fax: (717) 846-4193
We Calibrate the following instruments
-
Torque Cells
-
Force Gauges
-
Strain Gauges
-
Dynamometers
-
and more
|
Featuring the first and only National Standard for Torque in North America (verified by NPL through intercomaparisons with other NMIs) . Deadweight Torque Calibration up to 1475 ft-lbf (2kN-m)With An Accuracy of .002% of Applied Torque The machine currently at Morehouse was the National Torque Standard for the United Kingdom. NPL has commissioned this machine at our facility in York, PA making Morehouse the home to the only national torque standard in North America. (The National Institute of Standards and Technology does not currently offer torque calibration and no other lab in the US can match the accuracy of .002% of applied torque. There are very few labs in the world that can match this accuracy. A comparisson with other NMIs can be downloaded here)
From the tightening of wheel nuts on an automobile to the assembly of caps for pill bottles, or maximizing the output of an internal combustion engine, the accurate measurement of torque is essential to North American Industry. This machine will be used to calibrate transfer devices and disseminate the unit of torque within industry. It provides the ability to accurately verify torque systems through an unbroken chain of traceability to a NMI (National Metrology Institute). Our torque standards laboratory has facilities for calibrating from .5 ft-lbf through 1,475 ft-lbf (1 N-m to 2kN-m), or its equivalent in Kilograms force or Newtons. All torque standards used by Morehouse comply with ASTM specification E2428. Detailed information about our torque machine can be downloaded here. We offer ASTM E2428 calibrations as well as other standars.
The
force and torque calibration facilities and procedures are documented in a controlled
Quality Assurance Program Manual that provides for the requirements of the
following: |
