close× Contact Us +1 (717) 843-0081
0 review(s) | Add your review

An affordable, 6-wire sensing, highly accurate benchtop indicator with a display. The Morehouse 4215 is often the choice for calibration labs not wanting to spend ten times more money for their load cell instrumentation. 

This popular indicator is in stock now!

Model 4215


Looking for an affordable and highly accurate benchtop indicator with a display? The Morehouse 4215 is used with strain gauge based load cells.  The 4215 is a robust portable load cell indicator with sensing. What six wire meters, such as Model 4215, do is to eliminate the errors from the resistance changes due to temperature, as well as length and gauge of the cable. This indicator can read mV/V and use custom (free to download) Morehouse software to convert the mV/V units to engineering units with coefficient files from ASTM E74 or ISO 376 reports. This meter is often the choice for accredited calibration service providers wanting high accuracy, convenience and not wanting to break the bank. 


·       Fully bipolar range +/- 999,999 Display

·       24-bit resolution

·       USB connecting Interface

·       True 6 wire sense capability

·       0.005 % non-linearity

Complete your load cell system with a Model 4215 indicator available in stock for quick shipping.

Morehouse has computer software available for the 4215 that allows for conversion from mV/V to lbf, kgf, kN, N and reduces the overall cost for the customer while meeting the quality requirements in ISO/IEC 17025:2017 and complying with ASTM E74 and ISO 376 standards.  NCSLI RP-12 states in section 12.3 “The uncertainty in the value or bias, always increases with time since calibration”.     When the drift occurs, the indicator needs to be reprogrammed, and most quality systems require an "As Received" calibration, then the indicator needs to be reprogrammed, and an "As Returned" calibration is performed.   The actual level of work results in calibration costs that are much higher than they need to be. Morehouse developed software to avoid the excess costs as the coefficients used in the software are based on mV/V values and the "As Received" and "As Returned" calibrations are the same with the end user only needing to update the coefficients in the computer software.

4215 Indicator Single and Dual Channel Models Datasheet PD-4101.pdf Download
Model 4215 Load Cell Indicator Manual PM-4101.pdf Download